, 1 min read

Cisco Cablemodem Signal to Noise Ratio

Original post is here eklausmeier.goip.de/blog/2013/06-14-cisco-cablemodem-signal-to-noise-ratio.

For internet connection I use a cable modem EPC3208 from Cisco, which was supplied by the cable provider, Unitymedia in my case.

It shows the following measurements regarding signal-to-noise ratio, modem is at

Signal to Noise

More information on this modem can be found here: Cisco EPC3208 (dead link). According to Cisco modem the user and password credentials are admin/atlanta.